|
The perfect material
Erik found the ideal surface on which to do the layout drawing...
Date: 02/17/2007
Owner: Chris Robison
Views: 153
|
The first cuts
Using a jigsaw I cut a notch for the axle, and cut the board shorter to make it easier to work with
Date: 02/17/2007
Owner: Chris Robison
Views: 122
|
The board in place
The board is in place against the axle, so I'm ready to trace the axle suspension mount...
Date: 02/17/2007
Owner: Chris Robison
Views: 150
|
|
Tracing the link mount
I basically eyeball the link mount, and trace around it.
Date: 02/17/2007
Owner: Chris Robison
Views: 119
|
I suppose that looks right...?
There's the tracing, but I don't really like that I had to guess its position
Date: 02/17/2007
Owner: Chris Robison
Views: 146
|
Positioning the axle
The next thing to draw is the frame with respect to the axle...
Date: 02/17/2007
Owner: Chris Robison
Views: 146
|
|
Tracing the frame
I move the board to the other side and trace the frame
Date: 02/17/2007
Owner: Chris Robison
Views: 131
|
The tracings so far
Date: 02/17/2007
Owner: Chris Robison
Views: 122
|
Parts in place
I put the parts in place, but I realize that I'm going to have to be a lot more precise about it...
Date: 02/17/2007
Owner: Chris Robison
Views: 138
|
